The 9mm has an exceedingly shorter force curve, with peak stress ordinarily transpiring given that the bullet exits the situation. With this simple fact coupled with the higher bearing area and resistance within the barrel of assorted 147-grain bullets, there just is not really enough energy to reliably push them from for a longer period barrels.

I had been loading them with WSF powder under the FMJ load data within the hodgdon web site. I'm functioning minimal on that powder now so I'm aiming to burn up some CFE Pistol I have, and Titegroup.

Okay, so at this time, it nevertheless looks like every thing I just reported would require a lot more powder for that heavier bullet to accomplish the identical velocity. Proper ?

This is certainly an older thread, you might not receive a reaction, and could be reviving an outdated thread. You should consider making a new thread.

As the name indicates, this spherical propellant was designed for accuracy. Titegroup’s exceptional design delivers flawless ignition with every type of primers, like guide-totally free variations.

Ignore Exclusive in the 52. As well sluggish burning. Most effective results are seen with more quickly burning powders, but very little slower than 700X, WST or Green Dot which all have related burn charges.

Copper has a great deal more barrel friction than lead - yes, even just a thin layer of plating. A plated bullet behaves a great deal more similar to a jacketed bullet going down the barrel than a guide bullet. Loading to small conclude direct data check here is jeopardizing a bullet caught during the bore.

Testing forty five ACP within the variety with CFE Pistol powder. I seen which the load looked as if it would burn up cleanly and left minor residue about the gun.

I noticed no indicator of substantial pressures. I never ever prefer to shoot +P or increased loads. This load seem to be to make pretty limited teams. I actually similar to this powder if one is looking for the higher conclude of FPS to get a 9mm.

Some powders are effected by temperature,. Some get a little quicker or slower based on temps. Some powders meter better than others.

Chronograph: my indoor variety has crap lighting. I am unable to use an affordable caldwell a single. I'll have to save lots of for your magnetic just one. Some individuals within the assortment apparently use DOPLR equipment!

Wanted to find out if I could get better numbers. Went again to the vast majority of my 9mm loads with Titegroup and recognized that Titegroup likes a shorter OAL to execute improved. So I chose to shorten the OAL from 1.1 to 1.065 employing CFE Pistol Powder. I know by undertaking this I'd personally get increased pressures and higher speed (FPS), so I started very low and labored my way up.

No chance to get them on the array and find out how they are doing about the chronograph yet, but right up until I do I am not loading any using a heavier cost excess weight since pulling bullets with a kinetic puller sucks : )

Add to quotation Only clearly show this consumer #15 · Dec 27, 2016 Lee traditional turret push. I had been next a thread in the forum about what push for here getting and anyone suggested that push but to buy it from Kempf gun shop and afterwards purchase the opposite parts individually which labored out good.